Tasmota – Shelly 1 & 2 – braindump

4.8 (118) · € 17.99 · En stock

Special Attention Do not connect AC power and the serial connection at the same time Do not connect any additional sensors to serial pins. Check the correct jumper position before connecting AC power to Shelly 1. If the jumper is set to 12V you will destroy your Shelly! The Shelly 1 V2 user guide is…

Push Button on Shelly Devices · Issue #4914 · arendst/Tasmota · GitHub

Support for Shelly EM · Issue #8055 · arendst/Tasmota · GitHub

Shelly 1 flashing with Espeasy – braindump

Shelly EM not reporting data · Issue #14261 · arendst/Tasmota · GitHub

Shelly EM not reporting data · Issue #14261 · arendst/Tasmota · GitHub

Shelly 2.5 is randomly restarts with reason Hardware Watchdog and looses shutter position · arendst Tasmota · Discussion #20738 · GitHub

Upgrade to Tasmota from Shelly mongoose trough SW ( not cable) · Issue #8436 · arendst/Tasmota · GitHub

Experimenting that resulted in repeat successful reverting of Tasmota to Shelly via OTA. · Issue #9 · yaourdt/mgos-to-tasmota · GitHub

Support for Shelly 1PM? · Issue #5716 · arendst/Tasmota · GitHub

Add support for Shelly button1 · Issue #8781 · arendst/Tasmota · GitHub

GitHub - yaourdt/mgos-to-tasmota: A minimal firmware for OTA (over the air) flashing Tasmota, HAA, or ESPurna from Mongoose OS or compatible firmware types.