- Inicio
- epoxy resin
- THIN- 3:1 Two Part Thin Epoxy Resin System – Kit Size 1.33 Gallons - Composite Envisions
THIN- 3:1 Two Part Thin Epoxy Resin System – Kit Size 1.33 Gallons - Composite Envisions
4.9 (332) · € 32.00 · En stock
The Thin Epoxy Resin is a high quality resin system which works well for lamination of Fiberglass, Carbon Fiber or Kevlar. This epoxy has a syrup like consistency and will wet-out materials very quickly. This makes it very easy to work with. The epoxy is low odor. In addition to lamination of materials this epoxy
The Thin Epoxy Resin is a high quality resin system which works well for lamination of Fiberglass, Carbon Fiber or Kevlar. This epoxy has a syrup like consistency and will wet-out materials very quickly. This makes it very easy to work with. The epoxy is low odor. In addition to lamination of materials this epoxy also works very well as a sealer for porous materials such as wood, because of its ability to easily penetrate the materials. Resin viscosity: 600 cps.
This resin uses a 3:1 hardener. Mixing 3 parts epoxy to 1 part hardener will give you the appropriate final mixture.
This is considered to be a medium hardener, Our 2:1 epoxy will cure slower and our 4:1 hardener epoxies will cure much faster. However this 3:1 hardener will provide you with the best of both worlds.
Features:
Low viscosity and good color
Excellent toughness
Excellent flexibility
Properties:
Typical physical properties for hardener systems:
Physical properties shown are based upon the following cure schedule: 24 Hours at 77°F 2 Hours at 250°F
The information herein in general information designed to assist customers in determining whether our products are suitable for their applications. Our products are intended for sale to industrial and commercial customers. We require customers to inspect and test our products before use and to satisfy themselves as to contents and suitability for their specific applications.
This resin is filled by weight not volume.
Net Weight
8.75lbs/3969 g = aprox 1 Gallon
This hardener is filled by weight not volume.
Net Weight
2.80 lbs/1270 g = aprox 1/3 Gallon
Notice: This product may Blush.
The item has a shelf life of approximately one year. To ensure quality results and proper curing, please make sure to use the resin shortly after purchase.
Our easy to use 1:1 mix ratio epoxy comes blended with the highest rated UV inhibitors on the market! Perfect for your ocean epoxy art, geode epoxy
Fast Set Epoxy - 1:1 Thin Pour — UC Woods
Protection chaleur 250°C - Demandez vos échantillons - Lebon Protection, gant protection chaleur
Aqua•Resin S3 Non Toxic Composite Resin System Powder – ARCH Art Supplies
Silmar 41 Clear Polyester Casting Resin 1 Gallon with Hardener MEKP DDM-9 - Composite Envisions
THIN- 3:1 Two Part Thin Epoxy Resin System - Kit Size 1.33 Gallons
Premium Resin Tech products provide custom epoxy formulations that are dedicated to helping customers design, fabricate, and improve their composites
RDR-1812 High Temperature Carbon Filled Surface Coat
PRO-SET INF-213 Extra-Slow Infusion Hardener - Composite Envisions
THIN- 3:1 Two Part Thin Epoxy Resin System - Kit Size 1.33 Gallons
The Thin Epoxy Resin is a high quality resin system which works well for lamination of Fiberglass, Carbon Fiber or Kevlar. This epoxy has a syrup like
THIN- 3:1 Two Part Thin Epoxy Resin System - Kit Size 1.33 Gallons
RDR-3350 High Impact/High Temp Tooling Epoxy 450° F - Composite Envisions
System Three Epoxy 1.5 Pint Kit with Medium Hardener, 2 Part Epoxy Resin
Devcon 2 Ton Clear Two-Part Epoxy Adhesive - Base & Accelerator (B/A) - 50 ml Cartridge - 14260, Two Part Epoxy
THIN- 3:1 Two Part Thin Epoxy Resin System - Kit Size 1.33 Gallons
Alumilite Corp Alumilite Amazing Epoxy Starter Kit in the Craft Supplies department at
Fast Set Epoxy - 1:1 Thin Pour — UC Woods
