Inicio
xtool d1 pro
Xtool D1 Pro Adjustable Z-axis Extender/Focus Tool v10 – Cinder House Creations

Xtool D1 Pro Adjustable Z-axis Extender/Focus Tool v10 – Cinder House Creations

4.7 (645) · € 13.00 · En stock

*** This is for the Pro Model *** Adjustable z-axis extension for the Xtool D1 laser (Pro model). This extension allows you to keep the two leg supports on your D1 while switching between the rotary and normal cutting/engraving modes.The top screw adjusts the height and assists with fine tuning focus adjustments. This
*** This is for the Pro Model *** Adjustable z-axis extension for the Xtool D1 laser (Pro model). This extension allows you to keep the two leg supports on your D1 while switching between the rotary and normal cutting/engraving modes.The top screw adjusts the height and assists with fine tuning focus adjustments. This updated model allows for clearance of theGeeks at Large camera and shorter enclosures, without the need to change the screw out.A replacement fan grill (for both the 10W and 20W), a 1/8” hex bit adapter, two zip ties and a cable clip are included.*Note: The cable clip may not work on all units due to varying cable lengths. If this is the case use the enclosed zip ties for cable management.Feel free to reach out if you have any questions. Instructions: Remove your laser module from the gantry, mount the adapter on your laser module holding both parts firmly and adjust the side screw to secure it (Do not over tighten the screw). Mount the adapter back to the gantry. Hold the module in place while adjusting the side screw (Do not over tighten the screw). From there you can adjust the height by turning the bolt on top of the extension. Due to tolerances in printing and machines the unit may need to be gently pressed down.3D printing is a method of manufacturing that layers molten plant based plastic filament to build up to the model. Our printers are finely tuned and well maintained but you may see layer lines on some models due to the very nature of manufacturing.

Autofocus Z-Axis Xtool D1 Installation

xTool D1 Pro/D1 Extension Kit

Xtool D1 non Pro Adjustable Z-axis Extension/focus Tool V10

The original Z-Axis for Diode Lasers, with clamp system is now available with our Z-axis to ensure a perfect fit and the best hold for your module, no

Z-Axis Height Adjuster for Xtool D1 Laser

xTool D1 Pro Laser Engraver 4-in-1 Rotary Roller Kit for Glass Tumbler Ring, 10W Laser Cutter, 60W Efficient Laser Engraving Machine, Laser Engraver and Cutter Machine for Wood, Metal, Acrylic,Leather