4.6 (220) · € 88.50 · En stock
Fluke T150 Voltage/Continuity Tester
The Fluke T150 Voltage/Continuity Tester is Fluke’s top-of-the-range two-pole voltage tester and detects voltage from 6 to 690V in addition to performing resistance measurement between 0 and 1999Ω and carrying out continuity testing. Other options for assessing electrical circuits include switched-load RCD testing and single-pole phase testing whilst a phase rotation indicator helps the user work out phase sequence in three-phase systems. Test results, including indications of detected voltage, are conveyed to the user via a range of media including vibration in the hand, a bright LED bar-graph display, and an audible buzzer.
The LED display gives a notional voltage for voltage and the buzzer sounds when continuity falls within set limits but the user can also use the Fluke T150’s integrated LCD screen to see exact readings for both voltage and resistance (0 to 1999Ω). This therefore means that the T150 functions as both a voltage detector and a voltmeter. Data hold allows the user to freeze readings on screen for further convenience. Current type for voltage is automatically detected by the device and relayed to the user via the LED display whilst high voltages trigger the warning light, thereby improving safety. The T150 automatically switches to voltage measurement mode if voltage is detected whilst the quick response time (<0.5s) gives the user near-instantaneous results.
The Fluke T150 has an integrated torch for working in poor light and the WearGuard insulation highlights damage to test leads. It is rated as Cat IV to 600V and Cat III to 690V whilst a self-test function safeguards accuracy. The T150 constitutes a very accurate voltage detector with several useful additional features.
Fluke part number: FLUKE T150
Fluke Voltage and Continuity testers
Fluke T90
Fluke T110
Fluke T130
Fluke T150
Backlit LED Indicator
✔
✔
✔
✔
Backlit LCD Digital Display
✔
✔
Continuity test- Visual Results
✔
✔
✔
✔
Continuity test Audible Results
✔
✔ With On/off
✔ With On/off
✔ With On/off
Vibration Indicator Under Load
✔
✔
Indication of Polarity
✔
✔
✔
✔
Resistance Measurement
Up top 1999Ω
Switchable Load
✔
✔
✔
Single pole Test for Phase Detection
✔
✔
✔
✔
Rotary Tip Indicator
✔
✔
✔
Probe Tip Protection
✔
✔
✔
✔
Voltage Display with Discharged Batteries
✔
✔
✔
✔
Electrical Torch Function
✔
✔
✔
Wear/Indicator Test Lead Wire
✔
✔
✔
✔
Voltage AC/DC
12V to 690V
12V to 690V
6V to 690V
6V to 690V
Continuity 0-400kΩ
✔
✔
✔
✔
Frequency 0/40 to 400Hz
✔
✔
✔
✔
Phase Rotation 100V to 690V
✔
✔
✔
✔
Response Time (LED Indicator) <0.5s
✔
✔
✔
✔
200 kΩ input impedance, Current draw 3.5 mA @ 690 V, Current draw 1.15 mA @ 230 V
✔
✔
✔
✔
7 kΩ input impedance (with load buttons pressed)
Current draw 30 mA @ 230 V
Current draw 30 mA @ 230 V
Current draw 30 mA @ 230 V
Safety Rating
CATII 690V/CATIII 600V
CAT III 690V, CAT IV 600V
CAT III 690V, CAT IV 600V
CAT III 690V, CAT IV 600V
IP Rating
IP54
IP64
IP64
IP64
Key Features
Automatically detects voltages greater than 6V
Nominal voltage indication through LED bar-graph display
LCD screen gives exact readings and other information
Exact readings for voltage (6-690V) and resistance (0-1999Ω)
Continuity testing with buzzer between 0 and 400kΩ
Single-pole phase testing
Phase rotation indication
Automatically detects whether voltage is AC or DC
Tactile, visual and audible feedback
Warning signals for high voltage
Cat IV to 600V, Cat III to 690V
WearGuard clearly shows insulation damage
Data hold
Self-test function
#html-body [data-pb-style="64DB51AADF822"]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px 0px 10px; padding: 10px;}#html-body [data-pb-style="64DB51AADF82C"]{border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}#html-body [data-pb-style="64DB51AADF830"]{width: 100%;}#html-body [data-pb-style="64DB51AADF834"]{margin: 20px 0px;}#html-body [data-pb-style="64DB51AADF838"]{border-style: none; border-width: 1px; border-radius: 0px; padding: 0px;}#html-body [data-pb-style="64DB51AADF83B"]{border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}
Test Meter are suppliers of Electrical Test Equipment. Quality test meters, test equipment and electrical testers from Megger, Metrel, Seaward, Kewtech and FLIR.
We stock a full range of electrical testers ranging from 18th Edition testers & accessories to PAT testers and Part P electrical test meters. Whatever the electrician testing equipment you’re looking for, you’ll be sure to find it here at Test Meter UK.
Fluke T150 Voltage/Continuity Tester
The Fluke T150 Voltage/Continuity Tester is Fluke’s top-of-the-range two-pole voltage tester and detects voltage from 6 to 690V in addition to performing resistance measurement between 0 and 1999Ω and carrying out continuity testing. Other options for assessing electrical circuits include switched-load RCD testing and single-pole phase testing whilst a phase rotation indicator helps the user work out phase sequence in three-phase systems. Test results, including indications of detected voltage, are conveyed to the user via a range of media including vibration in the hand, a bright LED bar-graph display, and an audible buzzer.
The LED display gives a notional voltage for voltage and the buzzer sounds when continuity falls within set limits but the user can also use the Fluke T150’s integrated LCD screen to see exact readings for both voltage and resistance (0 to 1999Ω). This therefore means that the T150 functions as both a voltage detector and a voltmeter. Data hold allows the user to freeze readings on screen for further convenience. Current type for voltage is automatically detected by the device and relayed to the user via the LED display whilst high voltages trigger the warning light, thereby improving safety. The T150 automatically switches to voltage measurement mode if voltage is detected whilst the quick response time (<0.5s) gives the user near-instantaneous results.
The Fluke T150 has an integrated torch for working in poor light and the WearGuard insulation highlights damage to test leads. It is rated as Cat IV to 600V and Cat III to 690V whilst a self-test function safeguards accuracy. The T150 constitutes a very accurate voltage detector with several useful additional features.
Fluke part number: FLUKE T150
Fluke Voltage and Continuity testers
Fluke T90
Fluke T110
Fluke T130
Fluke T150
Backlit LED Indicator
✔
✔
✔
✔
Backlit LCD Digital Display
✔
✔
Continuity test- Visual Results
✔
✔
✔
✔
Continuity test Audible Results
✔
✔ With On/off
✔ With On/off
✔ With On/off
Vibration Indicator Under Load
✔
✔
Indication of Polarity
✔
✔
✔
✔
Resistance Measurement
Up top 1999Ω
Switchable Load
✔
✔
✔
Single pole Test for Phase Detection
✔
✔
✔
✔
Rotary Tip Indicator
✔
✔
✔
Probe Tip Protection
✔
✔
✔
✔
Voltage Display with Discharged Batteries
✔
✔
✔
✔
Electrical Torch Function
✔
✔
✔
Wear/Indicator Test Lead Wire
✔
✔
✔
✔
Voltage AC/DC
12V to 690V
12V to 690V
6V to 690V
6V to 690V
Continuity 0-400kΩ
✔
✔
✔
✔
Frequency 0/40 to 400Hz
✔
✔
✔
✔
Phase Rotation 100V to 690V
✔
✔
✔
✔
Response Time (LED Indicator) <0.5s
✔
✔
✔
✔
200 kΩ input impedance, Current draw 3.5 mA @ 690 V, Current draw 1.15 mA @ 230 V
✔
✔
✔
✔
7 kΩ input impedance (with load buttons pressed)
Current draw 30 mA @ 230 V
Current draw 30 mA @ 230 V
Current draw 30 mA @ 230 V
Safety Rating
CATII 690V/CATIII 600V
CAT III 690V, CAT IV 600V
CAT III 690V, CAT IV 600V
CAT III 690V, CAT IV 600V
IP Rating
IP54
IP64
IP64
IP64
Key Features
Automatically detects voltages greater than 6V
Nominal voltage indication through LED bar-graph display
LCD screen gives exact readings and other information
Exact readings for voltage (6-690V) and resistance (0-1999Ω)
Continuity testing with buzzer between 0 and 400kΩ
Single-pole phase testing
Phase rotation indication
Automatically detects whether voltage is AC or DC
Tactile, visual and audible feedback
Warning signals for high voltage
Cat IV to 600V, Cat III to 690V
WearGuard clearly shows insulation damage
Data hold
Self-test function
#html-body [data-pb-style=64DB51AADF822]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px 0px 10px; padding: 10px;}#html-body [data-pb-style=64DB51AADF82C]{border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}#html-body [data-pb-style=64DB51AADF830]{width: 100%;}#html-body [data-pb-style=64DB51AADF834]{margin: 20px 0px;}#html-body [data-pb-style=64DB51AADF838]{border-style: none; border-width: 1px; border-radius: 0px; padding: 0px;}#html-body [data-pb-style=64DB51AADF83B]{border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}
Voltage/continuity tester FLUKE T150 from eShop
Fluke T150 - 2 pole voltage and continuity test, TV & Home Appliances, Electrical, Adaptors & Sockets on Carousell
Fluke T90/T110/T130/T150 2 Pole Voltage and Continuity Testers Latest Editions
FLUKE - Voltage / Continuity Tester - T90/T110/T130/T150 – N2 Electrical
Fluke T150 Voltage & Continuity Tester KIT2B, C1600 Tool Case, 1AC Volt Detector
New and used Battery Testers for sale, Facebook Marketplace
Measure with confidence
Fluke T150 - Two-pole Voltage and Continuity Electrical Tester
Find many great new & used options and get the best deals for Fluke T150 Two-pole Voltage and Continuity Electrical Tester OR FLUKE T150VDE at the
Fluke T150 Two-pole Voltage and Continuity Electrical Tester OR FLUKE T150VDE