4.9 (669) · € 1.00 · En stock
PLEASE NOTE - AS WE ARE NOW ENTERING THE BUSY PERIOD OF THE YEAR FOR CONVERTING VANS, THE LEAD TIME ON THIS KIT IS CURRENTLY 2-3 WEEKS. We have created this kit to give people an affordable entry point into off grid power with Victron Energy. HIGH LEVEL KIT FEATURES 1600VA (1300W) Inverter Charger with power boost fun
PLEASE NOTE - AS WE ARE NOW ENTERING THE BUSY PERIOD OF THE YEAR FOR CONVERTING VANS, THE LEAD TIME ON THIS KIT IS CURRENTLY 2-3 WEEKS.
We have created this kit to give people an affordable entry point into off grid power with Victron Energy.
HIGH LEVEL KIT FEATURES
1600VA (1300W) Inverter Charger with power boost function on mains
30A MPPT Solar Controller (For connection to a solar panel)
30A DC-DC charger (For leisure battery charging from your vehicle)
1000A High current DC distribution system
100A Low current DC distribution system
Battery isolation and current/voltage monitoring
Mains hook up
COMPONENTS
VICTRON ENERGY MULTIPLUS 12/1600/70 INVERTER CHARGER
This new style Victron MultiPlus 1600VA is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a highspeed AC transfer switch in a single compact enclosure.
Input voltage range - 9.5 – 17V
Output Output voltage - 230VAC ± 2% Frequency: 50Hz ± 0,1% (1)
Cont. output power at 25°C(3) - 1600VA
Cont. output power at 25°C - 1300W
Cont. output power at 40°C - 1100W
Cont. output power at 65°C - 800W
Peak power - 2800W
Maximum efficiency - 93%
Zero-load power - 10W
Zero-load power in search mode - 3W
AC Input - Input voltage range: 187-265VAC / Input frequency: 45 – 65Hz
Charge voltage 'absorption' - 14.4V
Charge voltage 'float' - 13.8V
Storage mode - 13.2V
Leisure battery charge current - 70A
Starter battery charge current - 1A
Battery temperature sensor - Yes
Weight - 10.2KG
Dimensions (hxwxd) - 470 x 265 x 120 mm
VICTRON ENERGY ORION 12/12 30A DC-DC NON ISOLATED CHARGER
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.For use in dual battery systems in vehicles where the alternator and the starter battery are used to charge the leisure battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
Input voltage range - 10-17V
Under voltage shut down - 7V
Under voltage restart - 7.5V
Nominal output voltage - 12.2V
Output voltage adjust range - 10-15V
Cont. output current at nominal output voltage and 40 °C - 30A
Cont. output power at 25 °C - 430W
Cont. output power at 40 °C - 360W
Efficiency - 87%
No load input current - < 80 mA
Standby current - Less than 1mA
DC connection - Screw terminals
Maximum cable cross-section - 16 mm² AWG6
Weight - 1.8 kg
Dimensions - 130 x 186 x 80 mm
VICTRON ENERGY SMARTSOLAR 100/30 MPPT SOLAR CONTROLLER
This Victron SmartSolar 100/30 MPPT charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Battery voltage (Auto select) - 12-24V
Rated charge current - 30A
Nominal PV Power (12V) - 440W
Max PV short circuit current - 35A
Automatic load disconnect - Yes
Max PV open circuit voltage - 100V
Peak efficiency - 98%
Power terminals - 16 mm²
Weight - 1.3KG
Dimensions (h x w x d) - 130 x 186 x 70MM
VICTRON ENERGY LYNX 100A M8 DISTRUBUTOR
The Victron Lynx 1000A Distributor is a modular DC busbar with spaces for four DC fuses. It monitors the status of each fuse and displays its condition with an LED on the front. The Lynx Distributor is part of the modular Lynx distribution system.
Voltage range - 9 - 60Vdc
Supported system voltages - 12, 24 or 48V
Reverse polarity protection - Yes (1)
Current rating - 1000Adc continuous
Power consumption (2) - Maximum 100mA (with all LEDs illuminated)
Terminals - M8
Enclosure dimensions - (hxlxw) 290 x 170 x 80MM
Unit weight - 2.2 kg
(1) The RJ10 cable connection is not protected against reverse polarity(2) Powered from Lynx Shunt VE.Can or Lynx Smart BMS
VICTRON ENERGY 500A SMARTSHUNT
This 500A Victron SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display.The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
SmartShunt - 500A
Supply voltage range - 6.5 - 70 VDC
Current draw - < 1mA
Input voltage range, auxiliary battery - 6.5 - 70 VDC
Battery capacity (Ah) - 1 - 9999 Ah
Operating temperature range - -40 +50°C (-40 - 120°F)
Measures voltage of second battery, or temperature, or midpoint - Yes
Temperature measurement range - -20 +50°C
VE.Direct communication port - Yes
INCOMING MAINS CONSUMER UNIT (Pre Assembled)
This is a small mains consumer unit that runs from the surface mount 16A hook up point on the outside of your van and feeds the input of the inverter. This protects the inverter from any power surges and overloads and is the first point of safety, providing an earth to both the inverter body and the chassis of your camper van.
5 Way plastic consumer unit
30mA 63A Double pole RCD
16A Double pole MCB
63A DP Bus bar
Surface mounted 16A magnetic hook up point (Available in black or white)
Relevant electrical safety stickers
Hook up input - 2.5mm² three core arctic flex - 5M
Inverter input - 2.5mm² three core flex - 2M
Inverter earth (Terminated with ring terminal) - 6mm² tri rated flex - 2M
Vehicle earth (Terminated with ring terminal) 6mm² tri rated flex - 2M
OUTGOING MAINS CONSUMER UNIT (Pre Assembled)
This is the central mains consumer unit for the camper van. This takes the output from the inverter/hook up and feeds the power via double pole RCD's and MCB's to the mains sockets and switches.
8 Way plastic consumer unit
30mA 63A Double pole RCD
3 X 10A Double pole MCB's
Neutral 63A DP Bus bar
3 X 13A UK double sockets
3 X double surface mount back boxes
Single surface mount back box
Inverter output - 2.5mm² three core flex - 2M
Sockets & Switches - 1.5mm² three core flex - 3M each
Vehicle earth (Terminated with ring terminal) 6mm² tri rated flex - 2M
12V DISTRIBUTION
12V 12 Way fuse box with a built in negative bus bar, saving the time and extra money having to install a separate one.
LED function on each output that will illuminate to show any blown fuses.
Numerous labels for easy identification of outputs.
Complete with 12 fuses (3 X 5A, 3 X 10A, 3 X 15A, 3 X 20A).
Mounting screws.
ADDITIONAL ITEMS
PV Solar Isolator
600A Battery Isolator
Relevant fuses and fuse holders
Battery terminals with PVC covers
CABLING
We will provide adequate lengths of cable to complete the installation as seen on the screen, the lengths provided are suitable for most camper installations, but if you need anymore, this is all available to buy on our website.
For use to wire both the input and output of the Orion DC-DC charger, the output of the SmartSolar MPPT Controller, and the cabling to the 12V fuse box -
16mm² Red Positive Hi Flex - 10M
16mm² Black Negative Hi Flex - 10M
For use to wire the Multiplus Inverter Charger to the Lynx Distribution System, and to connect this to the chassis of the van and to power the Lynx via the isolator and shunt from the leisure battery -
50mm² Red Positive Hi Flex - 3M
50mm² Black Negative Hi Flex - 3M
For use to wire the input of the SmartSolar MPPT controller to the PV isolator -
6mm² Red Positive Double Insulated PV Cable - 3M
6mm² Black Positive Double Insulated PV Cable - 3M
For use to wire from the low current 12 way fuse box to your 12V accessories -
1.5mm² Twin core automotive thin wall cable - 30M
All crimps, terminals, and heat shrink will be provided in the kit to make the necessary connections.
ADDITIONAL IMPORTANT INFORMATION
As with all the kits and layouts provided on our site, they serve as a guide only and we recommend all wiring and installation is carried out by a qualified professional. Disconnect all AC and DC power sources to prevent accidental shock. It is the installer’s responsibility to ensure compliance with all the applicable installation codes, regulations, and to ensure the equipment is fitted correctly.
PLEASE NOTE - AS WE ARE NOW ENTERING THE BUSY PERIOD OF THE YEAR FOR CONVERTING VANS, THE LEAD TIME ON THIS KIT IS CURRENTLY 2-3 WEEKS.
We have created this kit to give people an affordable entry point into off grid power with Victron Energy.
HIGH LEVEL KIT FEATURES
COMPONENTS
VICTRON ENERGY MULTIPLUS 12/1600/70 INVERTER CHARGER
This new style Victron MultiPlus 1600VA is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a highspeed AC transfer switch in a single compact enclosure.
VICTRON ENERGY ORION 12/12 30A DC-DC NON ISOLATED CHARGER
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles where the alternator and the starter battery are used to charge the leisure battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
VICTRON ENERGY SMARTSOLAR 100/30 MPPT SOLAR CONTROLLER
This Victron SmartSolar 100/30 MPPT charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
VICTRON ENERGY LYNX 100A M8 DISTRUBUTOR
The Victron Lynx 1000A Distributor is a modular DC busbar with spaces for four DC fuses. It monitors the status of each fuse and displays its condition with an LED on the front. The Lynx Distributor is part of the modular Lynx distribution system.
(1) The RJ10 cable connection is not protected against reverse polarity
(2) Powered from Lynx Shunt VE.Can or Lynx Smart BMS
VICTRON ENERGY 500A SMARTSHUNT
This 500A Victron SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display.
The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
INCOMING MAINS CONSUMER UNIT (Pre Assembled)
This is a small mains consumer unit that runs from the surface mount 16A hook up point on the outside of your van and feeds the input of the inverter. This protects the inverter from any power surges and overloads and is the first point of safety, providing an earth to both the inverter body and the chassis of your camper van.
OUTGOING MAINS CONSUMER UNIT (Pre Assembled)
This is the central mains consumer unit for the camper van. This takes the output from the inverter/hook up and feeds the power via double pole RCD's and MCB's to the mains sockets and switches.
12V DISTRIBUTION
12V 12 Way fuse box with a built in negative bus bar, saving the time and extra money having to install a separate one.
ADDITIONAL ITEMS
CABLING
We will provide adequate lengths of cable to complete the installation as seen on the screen, the lengths provided are suitable for most camper installations, but if you need anymore, this is all available to buy on our website.
For use to wire both the input and output of the Orion DC-DC charger, the output of the SmartSolar MPPT Controller, and the cabling to the 12V fuse box -
For use to wire the Multiplus Inverter Charger to the Lynx Distribution System, and to connect this to the chassis of the van and to power the Lynx via the isolator and shunt from the leisure battery -
For use to wire the input of the SmartSolar MPPT controller to the PV isolator -
For use to wire from the low current 12 way fuse box to your 12V accessories -
All crimps, terminals, and heat shrink will be provided in the kit to make the necessary connections.
ADDITIONAL IMPORTANT INFORMATION
As with all the kits and layouts provided on our site, they serve as a guide only and we recommend all wiring and installation is carried out by a qualified professional. Disconnect all AC and DC power sources to prevent accidental shock. It is the installer’s responsibility to ensure compliance with all the applicable installation codes, regulations, and to ensure the equipment is fitted correctly.
Victron Energy Mains 230V Off Grid Kit With Mains Hook Up - Multiplus
6kVA 120/240V Off-Grid Power System
Complete Off-Grid Solar Kit - 4,800W 120/240V Output / 48VDC [15.36kWh EG4 Lithium Powerwall] 48VDC + 4800 Watts of Solar PV
Energy storage: family home - Victron Energy
MultiPlus-II - Victron Energy
Victron MultiPlus 12/3000 Inverter Charger Install - Citroen Relay Camper Van Conversion - Week 30
The MultiPlus-II is a multifunctional combined inverter and charger in one elegant package. Its many features include a true sine wave inverter,
Inverter/Charger Victron Energy MultiPlus-II 230V 50/60Hz
10kVA 120/240V Base MultiPlus-II Power System
Victron MultiPlus-II 48/3000/35-32 230V –
Victron Energy MultiPlus 3000VA 24-Volt Pure Sine Wave Inverter 70 amp Battery Charger, UL-Certified
MultiPlus - Victron Energy
Victron Energy Mains 230V Off Grid Kit With Mains Hook Up - Multiplus