• Inicio
• shelly 2.5
• Shelly 2.5 as pulse relay to switch existing dimmer - Configuration - Home Assistant Community

Shelly 2.5 as pulse relay to switch existing dimmer - Configuration - Home Assistant Community

4.9 (574) · € 22.00 · En stock

I have a dimmer (Jung 1731DD) which is mainly operated manually, but I would like to switch this dimmer on in case I’m not at home. This dimmer can be switched on/off using a pulse signal (relay on for 100ms). To make this work I have a Shelly 2.5.: One port is used as pulse relay (shelly is configured to automatically switch off after 0.1s). the other port of the shelly (always on) to feed the dimmer and measure the power consumption of the dimmer The shelly 2.5 is controlled via MQTT. C

Shelly Pro 3EM - three-phase energy meter WiFi Bluetooth Botland - Robotic Shop

Shelly 2.5

Ventilation: Shelly 2.5 with 3-level switch - ESPHome - Home Assistant Community

Shelly Device switch template for each click type - Blueprints Exchange - Home Assistant Community

Transform any device with Shelly and Home Assistant: A step by step guide for 3-WAY circuits

Shelly - Home Assistant

Physical switch on Shelly RGBW2 rapidly turns ON and OFF - ESPHome - Home Assistant Community

Shelly 2.5 entity shows as switch not light - Configuration - Home Assistant Community

Switch state based on input from binary sensor and controlled by relay pulse - ESPHome - Home Assistant Community