XLR Audio Cable with Male Right Angle to Female Straight Neutrik Conne - Custom Cable Connection
5
(355) ·
€ 22.99 ·
En stock
Custom Cable Connection microphone cables are a great choice for custom "pro" audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires wit
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:
High performance Balanced Microphone Cable 24 AWG with 95% spiral shield. PVC Black Jacket
Shield: Bare annealed copper
Capacitance: 21 pF/ft. @ 1 kHz
Characteristic Impedance: 70 Ohm NOMINAL
D.C. Resistance @ 20°C: 23 Ohm/1000'
Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors
Assembled in Dallas, TX by Custom Cable Connection
Pinout Tip : Red
Ring : Blue
Shield : Shield
Don't see the length you are looking for, we will build it for you!
For a custom length quote, call: 866.770.3207 or email: sales@ Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.
Typical Applications:
Audio connections between multimedia devices.
Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.
Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc
Features:
2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire
3.5mm Male Stereo Solder Plug, Nickel plated with strain relief
1/4 Plug with 3 Conductor Nickel Shell Solder Contacts
Don't see the length you are looking for, we will build it for you!
For a custom length quote, call: 866.770.3207 or email: sales@ Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.
The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .21024-gauge bare copper conductorsConnectors: XLR Male Plug to XLR Female JackRugged Nickel Plated XLR Connectors with Strain Relief Neutrik NC3MXX and NC3FXX Connectors Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:
High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.
PVC Black Jacket
Shield: Bare annealed copper
Capacitance: 21 pF/ft. @ 1 kHz
Characteristic Impedance: 70 Ohm NOMINAL
D.C. Resistance @ 20°C: 23 Ohm/1000'
Neutrik Connectors: NP3RX and NYS228
Assembled in Dallas, TX by Custom Cable Connection
Don't see the length you are looking for, we will build it for you!
For a custom length quote, call: 866.770.3207 or email: sales@ Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.
The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210
24-gauge bare copper conductors
Connectors: XLR Male Right Angle Plug to XLR Female Jack
Neutrik XLR NC3MRX and NC3FXX![](https://m.media-amazon.com/images/I/515ACdOY5YL.jpg)
Neutrik NC5FRXB 5-Pin Right Angle XLR Female Cable Connector : Electronics
![](https://ae01.alicdn.com/kf/H304a78a4a5c34edfa7d84229610379bbl.jpg_640x640Q90.jpg_.webp)
Microphone Cable, Xlr Trs Mogami
Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or
![](https://customcableconnection.com/cdn/shop/products/31094ra2_5_2000x.jpg?v=1570027512)
XLR Audio Cable with Male Right Angle to Female Straight Neutrik Connectors
TRS AUDIO/STEREO CABLE: This balanced microphone cable has male to male connectors, making it the perfect accessory for line out into soundboard
![](https://m.media-amazon.com/images/I/71kfdwTPbCL.jpg)
30 Foot Neutrik NC3MXX Male XLR to Neutrik Rean NYS228 1/4 Inch (6.35mm) TRS Balanced Pro Audio Cable by Custom Cable Connection
BALANCED XLR MIC CABLE: Two of the conductors are signaled (+ and -) and the last conductor (shield) serves as a guard to sensitive RFI [radio
![](https://m.media-amazon.com/images/I/71wFjxYpjML.jpg)
100 Foot Custom Cable Connection Pro-Audio Balanced Microphone Cable with Neutrik NC3MXX XLR Male Connectors
![](https://customcableconnection.com/cdn/shop/products/111844Balancedandunbalanced1stpic_b7b804eb-8363-4a12-bc89-803b9d607fca_2000x.jpg?v=1668829366)
Unbalanced XLR Male to 3.5mm TRS Audio Cables with Neutrik Connectors - Custom Cable Connection
Dual Shielded Package Dimensions: 1.27 H x 9.144 L x 12.7 W (centimeters) Package Weight: 0.3 pounds Country of Origin : Liechtenstein
![](https://m.media-amazon.com/images/I/717y7oLBBCL.jpg)
Neutrik NC3FRX 3-Pin Right Angle Female XLR Cable Connector with Nickel Housing and Silver Contacts
UNBALANCED XLR CABLE: This unbalanced cable features a female XLR connector to a male 1/8 inch connector, making it the perfect accessory for
![](https://m.media-amazon.com/images/I/61VoX04p9+L._AC_UF894,1000_QL80_.jpg)
75 Foot XLR Female to 1/8 Inch (3.5mm) Male UNBALANCED audio Cable 24 AWG by Custom Cable Connection
![](https://cdn.sajelectronics.com/file/thebroadcastshop-3/images/cables/large/mqbac-cam.jpg)
SA&J Beta Snake Cable With 7pin XLR Break Away Camera End
![](https://ae01.alicdn.com/kf/H60f6d4348e32471d8cb87ca6a55f396eB.jpg_640x640Q90.jpg_.webp)
Atomos 10 Pin to Dual Neutrik 3 Pin Female XLR Breakout Audio Input Cable for Shogun